Book a call
  1. Home
  2. Products
  3. IMS modules
  4. IMS Digital8
IMS Digital8 - Digital module
Project-based solution

IMS modules

IMS Digital8Digital module

Model: IMS Digital8 · Manufacturer: GSL d.o.o.

The digital module of the IMS system for reading and controlling digital signals, with diagnostics for every channel.

  • Configurable digital inputs and outputs
  • IEC 61131 type 1, 2 and 3
  • Open and short circuit detection per channel
  • Supply voltage monitoring
  • 2" graphic display
PriceOn requestThe quote is prepared according to the project and scope of the system.

01 / About the product

What is the IMS Digital8?

Inputs and outputs are configured to suit the site. The input characteristic complies with IEC 61131 type 1, 2 and 3, and the module also accepts 2-wire sensors.

The 2-inch display shows states, errors and alarms for each channel on site.

02 / Specifications

Technical data: IMS Digital8

Technical data

Supply / consumption24 V / 2 W
Operating modeDigital input and digital output
Input characteristicIEC 61131 type 1, 2 and 3
Rated signal voltage24 V
Signal 0 / signal 1-30 to +5 V / +11 to +30 V
2-wire sensorYes, permitted quiescent current 1.5 mA
Open and short circuit detectionYes, per channel
Diagnostic alarmYes, per channel
Dimensions (H × W × D)90 × 70 × 65 mm
Operating temperature-25 °C to +70 °C

03 / Documentation

Full technical documentation with wiring diagrams (PDF, in Serbian - English versions on request):

Questions about the IMS Digital8

How do I order the IMS Digital8?

The quote is prepared according to the project and the scope of the system. Send an inquiry to office@gsl.rs or call +381 63 623 757 - on-site presentation and training are free of charge.

Where is the full technical documentation for the IMS Digital8?

On this page, in the Documentation section, you will find the PDF with technical data. The documents are currently in Serbian; English data sheets and detailed wiring diagrams are available on request.

Who manufactures the IMS Digital8?

The device was developed and manufactured by GSL d.o.o. in Novi Sad, Serbia - schematic, PCB, firmware and software are done by our own engineers. That is why we can also adapt it to specific project requirements.

Contact / inquiry

Inquiry for the IMS Digital8

Send us the quantity, location and a short description of the application - we will reply with a quote and technical details. On-site presentation and training are free of charge.