Systems
MSD8970EPre-insulated pipe leak detector
Model: MSD8970EV4 · Manufacturer: GSL d.o.o.
MSD8970E is an electronic instrument developed at GSL for permanent leak detection and for checking the alarm wires of pre-insulated district heating pipelines.
- Leak detection on pre-insulated pipelines
- Break detection on the alarm wires
- Detection of a short circuit between pipe and alarm wire
- Up to 6,000 m of alarm wire per channel
- Relay output for PLC / SCADA and 3 AUX inputs
01 / About the product
What is the MSD8970E?
Pre-insulated pipelines have alarm wires along their entire length, which allows continuous remote monitoring. Detecting a failure early prevents moisture from spreading through the insulation and avoids costly repairs.
The device is permanently connected to the alarm wires and the pipe, and checks all signal loops of up to 6,000 m simultaneously and independently. Built-in memory stores the measurements for all channels and the device also measures the ambient temperature. Before installation it is calibrated and the limit values are set for the specific route, based on the design and loop lengths.
When it detects one of the three alarm states, the device shows the alarm type and the affected pipe on its display. A relay output (NO/NC) connects to the PLC and SCADA system, and three AUX inputs accept extra sensors - for example a moisture sensor in a manhole or a door contact.
02 / Specifications
Technical data: MSD8970E
Technical data
| Model | MSD8970EV4 |
|---|---|
| Power supply | 230 VAC / max 15 W |
| Wire length per channel | Up to 6,000 m (2,000 m recommended) |
| Connection | S1, S2 supply · S1, S2 return · S1, S2 DHW |
| Alarm signalling relay | 1 × 24 VDC / 2 A (NO/NC) |
| AUX inputs | 3 relay inputs |
| Internal fuse | 400 mA 250 V, 5×20 mm, T-type |
| Operating temperature | -25 °C to +60 °C |
| Certificates | IP certificate, EMC certificate |
03 / Documentation
Full technical documentation with wiring diagrams (PDF, in Serbian - English versions on request):
Questions about the MSD8970E
How do I order the MSD8970E?
The quote is prepared according to the project and the scope of the system. Send an inquiry to office@gsl.rs or call +381 63 623 757 - on-site presentation and training are free of charge.
Where is the full technical documentation for the MSD8970E?
On this page, in the Documentation section, you will find the PDF with technical data. The documents are currently in Serbian; English data sheets and detailed wiring diagrams are available on request.
Who manufactures the MSD8970E?
The device was developed and manufactured by GSL d.o.o. in Novi Sad, Serbia - schematic, PCB, firmware and software are done by our own engineers. That is why we can also adapt it to specific project requirements.
Same category
Related products
SystemsIMS
Industrial monitoring system
Modular system for monitoring and control of industrial and infrastructure sites - real-time measurements, alarms and remote access.
SystemsIntelityNET
Smart LED mesh lighting
Street and decorative LED luminaires with a smart controller: remote dimming, fault detection and energy savings of up to 40%.
SystemsI-SEC
Access control
Access control system with entry logs, unauthorised access alerts and flood, smoke and glass-break detection.
Contact / inquiry
Inquiry for the MSD8970E
Send us the quantity, location and a short description of the application - we will reply with a quote and technical details. On-site presentation and training are free of charge.
- Phone / call+381 63 623 757
- WhatsApp message+381 63 623 757
- Emailoffice@gsl.rs

